Just found it timing chain has jumped or vanos seals away

Just rebuilt the disa valve and still the same any help would be appreciated.

Hello folks hope someone can help,i'm having problems with my 02 3.0i x5,im getting 55 lambda probe heating bank 2,and burn fail in cylinders 4 5 and 6 with a misfire, i've changed all 4 lambda sensors the plugs and now ordered a new maf can anyone help please?

Hi guys looking for some help last week i changed my camshaft sensor on my 02 3.0i and it now seems to take a bit longer to start ie starter motor is running longer before the car starts but runs fine with no miss fire or stalling any ideas or has anyone seen this?

All connected now,missed the oil pressure sensor.

Thanks for the info,turns out i had managed to miss a connector and was lying behind the loom but i now have a spare connector with 1 female pin inside lying spare any idea where it should be?

Hello guys i've just replaced the ccv in my 02 3.0i i now have error 68 Tank Ventilation Valve error with the EML on i've replaced the valve but still get the error,i have found a plastic pipe under the manifold next to the valve that doesn't seem to attach to anything this pipe has a bend in it and...

All fixed and working fine turns out one of the new gears had a small flaw and was jamming the motor.

[quote="henrym3"] As far as I understand it switches the motor off at the end of the fold in/out via that white plastic ring with the grooves in it and if it is even slightly maladjusted the mirror won't fold in or back out. Sometimes if you very lightly touch the mirror in or out then it ...

Hi thank you,the metal clip is still attached to the switch,what does the micro switch actually do?

Hi guys anyone had this problem before,my passenger mirror stopped folding with the button the drivers one folds in then back out due to passenger one not working so i bought a motor and the 2 gears that go in he housing put the mirror back together and still it doesn't fold,when i take the mirror a...

You'll lose water and get a low coolant level warning,the part number4 is for cooling autobox

i had the split expansion tank and had to replace it at the bottom of the expansion tank bracket is where part number 4 sits in and goes up inside the expansion tank and is only used on auto vehicles and beware if you have an auto and have to replace the expansion tank these little thermostats usual...

[quote="marsie"] Thanks Si, i have split the grills and done the centres satin black and think it looks much better. The other job has been to remove the mudflaps Hopefully getting my wheels back from refurb on monday but until then i am running the refurb shops 22" loan wheels :puke:...

AKspeedo done mines 2 years ago i also had him put chrome rings in from an m5 great job he took £100 for doing it,but then im not far from him and left the car with him for couple of hours.