I am using the Carly scanner but I am looking into changing this as the injector will need coding anyone got ideas for a good scanner / coder ?

The code I get now is 0042FB
Description:
Injectors bank 2, control
I have done an ohms test injector 1,2,3,4,6, are 183-184 and injector 5 is 120-140 so I take it this could be the problem?

Hi all
Any ideas every time I boot the car now the engine cuts out I have to stop take key out put it back in and it starts first time and it starts first time
Does come up with injectors 3/46 ? But clear it and it’s fine ???

Hi all has anyone changed the rear wheel bearing ?
Is it easy or hard and do you just replace the bearing or stub axel as well thanks

I think that when you spray the cleaner in the dpf though the back pressure sensor tube it’s only cleaning the dpf section and not the top part cat if I am correct this is why I am thinking about taking the temperature sensor out to fully clean from the top I use wurths dpf cleaner and it blow some ...

i get a code 00480A clear the code and do force regen and you can feel the car regen, thermosats changed 40,000 miles ago glow plugs and relay about 35,000 miles ago car has done 140,000 miles does these mean anything to you guys good or bad tia?? ambient pressure : 984.62 bar ash in particulate mas...

Hi has any one removed the temp senor in the top of the dpf while the dpf is in place easy or hard job with trolley jack? Also has anyone removed dpf from car using trolley jack easy or hard ? I sprayed dpf cleaner in though the back pressure sensor which has cleaned the ash out but not the soot in ...

Hi all had my dpf was reading 60% soot and 68g ash I cleaned it out with some type of cleaner which I put into the dpf and the ash is 0.6g ash but the soot levels operate at about 60& then drop to 0 with a regen then go back up at 48% soot at moment is this right or is something not working righ...

Sorry if asked before but has anyone removed a dpf filter on a 2009 e70 35d any photo’s how hard is it , mine is 57 ash and 52 soot so I would like to clean / change mine but first I need to remove it ?
Thanks

Had my oil changed at Bmw and had to ask them to reset the fault code which comes on when you have done 100000 miles £79 not to bad

I cut a small hole to sit the module in the battery tray in the boot ,wired straight onto the battery.

Ok I have now discovered that the door seal around the door if full of water ? I put a small cut in it at the bottom to drain the water ,so how does this water get in to the seal ??

Hi so I have a rear water leek in side car passenger side both sides it seems to be water holding in the rear door seals ,the rear sun roof drain holes are clear front ones are draining ok when I pour boiling water down them. It’s as if the door seals are filling up with water an then flooding over ...

I have only aux socket in the arm rest which will connect this way but wanted to go Bluetooth if possible,I also have dvd enabled but can’t seem to find dvd’s to player either

Hi all probably been asked before
I have a ccc proffesional in my x5 2009 which connects to my phone via blue tooth does anyone know what I need to connect my phone to play music by Bluetooth please thank you