[quote="lezmtaylor"]
Well done, glad it works ok.

Lez
[/quote]

BTW - I can’t charge via the front terminals if the switch is off.

Kill switch installed and working, not much use as the battery is too low, will wait for ECP Easter discount before I pickup the battery. So the wires being so thick did present problems, the cable is a little thicker then the OEM lead, was tough getting 2 of them throw the metal plate and under the...

So my logic was that as I will be using negative kill switch ALOT.  Hence new battery I buy I'd like one that holds charge for the longest duration, if there nothing much in it then obviously pleased to save the money on non-AGM.  Plan is use kill switch and plug in a solar charger via the front cla...

Parts still not here for kill switch.  ::) Solar charger going back, after previous success, 24 hours later it would not start. Note when i turn car off after a decent run, it shows 12.2v, in less then 60 seconds it drop to 11.8, then steady downwards from there, I assume its safe to say the battery...

Silly question as per usual. I got the ODB 2.4 watt solar charger and result the car started 3 days later, would normally be dead. So my dad has a solar charger doing nothing is there any harm in using the 2 together so I'd use his visa the cigarette plug?

FYI - Cables and switch ordered.

Switch has 10mm so will go M10

About to order some cables, its asking whether I want m8 or m10, I am replacing the current cable so want to use the same point in the car, do I need m8 or m10 size? Cables: 1 battery clamp to ring terminal 1 ring terminal to ring terminal Cable Specification: VDE 0298-4, BS638 PART 4, VDE0282-6, CE...

Correct going with negative kill switch option. Wasn't sure it would work as most solutions talk about kill on the positive but Lez has shown me it can work and a far easier option to install.

Does it matter if I use a longer cables so adding a max of 1.5m?

[quote="lezmtaylor"]
I just butchered a good quality , spare, jump lead.

Lez
[/quote]

Creativity has no bounds.

[quote="sleepyfolk"]
Good kit here generally and helpful if you need advice https://www.12voltplanet.co.uk/battery-cable.html
You can get the correct terminal ends etc from them
[/quote]

Great I was getting confused with all the earth cables available.

[quote="briankerrys47"]
'Just need some earth cable' Sanj )/Raj have left country )
[/quote]
There so many earth cables to choose.

[quote="lezmtaylor"] Just used the icon at end of reply post, got the switch off ebay was not expensive(2010 approx), I disconnected the neg battery lead at battery, cut the neg battery lead an spliced extra neg battery cable to the 2 ends then ran the 2 cables up to the switch . Ebay item...

Lez your a star, just had a quick look under the hood, and it would be very easy to splice into the current negative and stick one of these switches onto the back seat.  This looks like the easiest solution and pretty cheap too, think I may give this a whirl.  Not to mention seems so easy I won't ev...

[quote="briankerrys47"]
Welcome home Jeegnesh,this post not going to cost us is it  ) )
[/quote]

Just your precious time for now, my posts tend to last many pages.