Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

E53 slack electric window mod

How-To articles ONLY go here.
Post Reply
Themoog2
Member
Member
Posts: 523
Joined: Sun Nov 25, 2018 10:29 pm
Location: Cambridge

E53 slack electric window mod

Post by Themoog2 » Tue Jun 11, 2019 9:55 pm

A while ago my driver side window seemed to have some slack in its opening between pressing the switch to the regulator moving. It felt as if the cable was loose..
I replaced the window to cable slider clips and connecting plastic brackets but that didn’t cure the problem.
The way I found to get a solid feel to the window operation is to replace the through window connector bolt and capture nut with a standard 6mm nut and bolt. Just ensure there is a larger diameter washer on the glass side along with a rubber or nylon washer.
Don’t have the bolt too long either as it can foul the door strengthening bar when fully open.
Now my driver window movement is direct and closes with a firm thud. Doesn’t rattle when the door is closed with the window open anymore either.
I hope I’ve explained that in a reasonable way..

weirdfish
Member
Member
Posts: 637
Joined: Fri Apr 01, 2011 7:10 pm
Location: Glos.

Re: E53 slack electric window mod

Post by weirdfish » Tue Jun 11, 2019 10:54 pm

:worthless:

User avatar
marti
Member
Member
Posts: 770
Joined: Tue Jan 19, 2016 11:33 am
Location: Norfolk

Re: E53 slack electric window mod

Post by marti » Wed Jun 12, 2019 7:18 am

Well done, windows can be a pain and replacing with stronger parts always works.

Themoog2
Member
Member
Posts: 523
Joined: Sun Nov 25, 2018 10:29 pm
Location: Cambridge

Re: E53 slack electric window mod

Post by Themoog2 » Wed Jun 12, 2019 10:30 pm

I can't post pics as I've put it all back together..

Post Reply