I picked up an E70 yesterday and the PDC button is a bit worn. It seems to be a fairly common issue as I noticed plenty of others on autotrader with the same.
Has anyone ever replaced them? Do you need a whole panel, or can you get a single button?
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Worn Buttons
Re: Worn Buttons
Check Realoem to see what might be available. BMW will try and sell you the whole module!
Never anthropomorphise computers. They hate that.
Re: Worn Buttons
Aye I was even going to get one on eBay as I assume it could be dismantled, but £30 just to replace a button seems excessive!
Re: Worn Buttons
To follow up, I took my panel apart a couple of weeks ago and confirmed the buttons could be removed. I bought a replacement panel on eBay for £12 (non camera button) and took them both apart and swapped the pdc and boot release buttons.
Re: Worn Buttons
was it an easy job? I could do with changing a few on mine.What's the camera button for? ive got rear and side cameras but haven't got that button
Re: Worn Buttons
Yes, if I can do it then honestly anyone can!
Its for 360 cameras, I have them in the bumper too.
Its for 360 cameras, I have them in the bumper too.
Re: Worn Buttons
I've now got button envy I'm gonna have a go at this on mine the worn buttons drive me mad.Cheers
-
- Snr Member
- Posts: 1688
- Joined: Mon Apr 18, 2011 8:30 am
- Location: Kent, garden of England
Re: Worn Buttons
BMW used to offer a complete but dummy switch panel for the E53, that afaik wasn't shown on RealOEM. It may be worth enquiring if the same option exists for E70/71