hello,
about the scanner i think to buy one that its almost the same like the china version but i'm gonna buy him here in slovenia because of the coding part. I have a few friends with bmw-s and there would like to have some things coded But when i'm gonna buy another newer bmw i'm gonna buy the BMWhat from googleplay
and as far as i know the reslers usb diagnostic has its software integrated in the usb adaptor, the one on my link has a standard usb plug and in the black little box its the software. I might buy the one of this two options.
How much cost the reslers usb adaptor?
Testing and Diagnosing the E53 Webasto Thermo Top C/Z
- janzek-e46
- Newbie
- Posts: 3
- Joined: Sat Jan 24, 2015 4:03 pm
Re: Testing and Diagnosing the E53 Webasto Thermo Top C/Z
Encouraged by all the good work being done and discussed in this thread, I spent time today sorting a remote for the webasto on my 3.0d. I wrote up a little thread about it on XOutpost.
http://www.xoutpost.com/1079703-post7243.html
Thanks very much to everyone who has contributed here and especially Jaynana!
http://www.xoutpost.com/1079703-post7243.html
Thanks very much to everyone who has contributed here and especially Jaynana!
Re: Testing and Diagnosing the E53 Webasto Thermo Top C/Z
Hello, I coded the webasto option, worked for a year or so.
Stopped working some time ago, hooked up my 140 coder and it says circulation pump error.
So will order a new one.
However, feeling a bit energetic I thought I started to investigate the telestart option.
It seems I have no wiring going to pin 1 on the webasto.
Also in the boot, there is no 3 wire connector.
So it seems not all cars are prewired. Mine is an E53 3.0D 2002/05.
Anyone else experienced this?
Stopped working some time ago, hooked up my 140 coder and it says circulation pump error.
So will order a new one.
However, feeling a bit energetic I thought I started to investigate the telestart option.
It seems I have no wiring going to pin 1 on the webasto.
Also in the boot, there is no 3 wire connector.
So it seems not all cars are prewired. Mine is an E53 3.0D 2002/05.
Anyone else experienced this?
-
- Newbie
- Posts: 1
- Joined: Mon Nov 25, 2019 5:57 pm
Re: Testing and Diagnosing the E53 Webasto Thermo Top C/Z
Hi,
How do I get to the pictures? my e53 has a heater, but only has a ventilation option on the on board computer.
If I put 12V on pin 1 should that start and run the unit? (assuming no faults)
Andy
How do I get to the pictures? my e53 has a heater, but only has a ventilation option on the on board computer.
If I put 12V on pin 1 should that start and run the unit? (assuming no faults)
Andy
Re: Testing and Diagnosing the E53 Webasto Thermo Top C/Z
It’s some time since I did it, but try looking at my write-up here from a few years ago:
https://xdrivers.co.uk/forum/viewtopic. ... 648#p98648
Yes - 12V to pin 1 should fire up the Webasto if there are no faults.
https://xdrivers.co.uk/forum/viewtopic. ... 648#p98648
Yes - 12V to pin 1 should fire up the Webasto if there are no faults.
-
- Newbie
- Posts: 7
- Joined: Wed Jan 19, 2022 4:17 pm
Testing and Diagnosing the E53 Webasto Thermo Top C/Z
Did you ever find out if pcb was knackered
-
- Newbie
- Posts: 7
- Joined: Wed Jan 19, 2022 4:17 pm
Testing and Diagnosing the E53 Webasto Thermo Top C/Z
Was the pcb knackered
Testing and Diagnosing the E53 Webasto Thermo Top C/Z
2019 thread and we’ve not seen many in the thread for quite a while sadly, none since May ‘21. Try a PM?
Never anthropomorphise computers. They hate that.