Page 2 of 2

Re: wiring for lighting board

Posted: Tue Sep 15, 2015 1:30 pm
by Steamyrotter
[quote="briankerrys47"]
[quote="X5Sport"]
Ideally yes.

There is a strap that will help 'lift' the wheel.  It hooks over the lower tailgate (into two slots in the top edge) and when you open the tailgate it lifts the spare.... :)
[/quote]Well you live and learn  :o :o :o
[/quote]

Obviously not read your handbook then?????

O:-)

Re: wiring for lighting board

Posted: Tue Sep 15, 2015 4:45 pm
by strummer
Fitted today only problem was when I came to plug the siemens control box in,there was no way it was going in,rang pfjones and asked if there was anything on the loom socket that pulled or slid out,no they said it just plugs in,there was no way it was so they gave me the number of a local fitter,went to see him and when he looked at the loom he said the connector is in the closed position,put a screw driver behind it slid out the central part connected it and slid it back in!
Whoever did the how to on here needs to modify it to include the above.
All worked great once the unit was in so all good in the end  :)