XSeries-forum

can some nice soul with a scanner 1.41 read there pdc module and tell me what settings everything should be set on , Eg. gong noise. and switch settings,  im determined to fix the pdc's on the beasty. and starting point is make sure its configurated firstly before hand

Cheers

Steve

Basic options - these are for if you have front PDC & thus a button to enable/disable PDC

Acknowledgement - pretty self explanatory if you ask me but you can have a beep sound the first time you use PDC & not again until the car is restarted (selected), or every time you use PDC.

Reversing gong, not 100% but imagine it's an annoying beep all the time you're reversing

Converters etc - these will be the settings...different models have different settings

cheers for that mine were different to yours,  ive altered them to the same
my on/off acknowledgement was unchecked, so ive changed this,
weird thing is while I was  clearing my codes, I heard a slight pulsing sound from the rear of the car.
opened boot, and noticed it was coming from location of the rear fuse box at the right
accustic generators were different too
any whoooo

the sound was coming from this

http://www.ebay.co.uk/itm/BMW-Gong-twee ... 2ee2a8c06f

it sounded like a feint popping sound ,

any ideas?