XSeries-forum

Fitted a ck3100 to the X5 there but it's not interrupting the radio to play through the speakers.

I got the correct (I think) SOT lead from connects2 and it should all be plug and play. I've fitted loads of these in the past but haven't done 1 in a hundred years!

Anyone tell me if I've missed something simple?

Isn't there a mute, wire that you have to tap in somewhere in the loom.
Look on the parrot site, they used to do wiring diagrams.


http://www.tonyapetphotography.com/wiri ... ot-ck3100/

Hi

Here's a link to the instruction manual and from page 17 onwards as you say should be plug and play as you have the ISO connectors

https://www.manualslib.com/manual/12046 ... =17#manual

Yeh pretty sure with the sot lead I shouldn't need to worry about mutes.

Do I need to disconnect the factory Bluetooth module or would it not affect things?