XSeries-forum

Hi All,

First post on this forum - was sent here by xoutpost and fullfatrr... so hoping someone can help me...

I have an l322 Range Rover which I'm sure you know is basically an x5 in a different shell...

Anyway long story short I have done an NBT retrofit and I need to code the dip with ncsexpert from board monitor to mid basis to stop it switching off randomly.

I can use ncd no problem as I have an e63 however it will not work with range rovers ive googled and googled to no avail...

What id really like if anybody could help as I'm out of options is to pay someone o either meet me and plug my unit into their car and code it or I could post and do the same and you post back... obviously happy to pay for your time...

Really hoping I can find someone on here with the skills

Thanks

Dan

Not 100% sure, but the x5 E53 radio and DSP amp as well as CD player and sat nav do not need coding.  E70s do, though.  Most bits on the E53 seem to be plug and play except when you want to get rid of say, air suspension error messages etc.

Hi basically there were two options for the amp - nav and non nav I need it coding to non nav as it keeps looking for the nav unit and powering down... cheers!

£50 for anyone that can help desperate now