Page 1 of 1
Which Aftermarket Manufacturers Offer Quality & V.F.M.
Posted: Tue Sep 22, 2020 3:27 pm
by shy7g
Which Aftermarket Manufacturers offer Quality and Value For Money
Okay we all would like to replace parts on our vehicles with the genuine OEM parts every time, but as life is we can't sometimes justify purchasing these premium priced parts and have to settle for the aftermarket one's instead at a far cheaper price. So as there are so many very good quality aftermarket manufacturers out there, there's also
"ODEAR!! I shouldn't have bought that in the first place, it was far to cheap to be true", very poor quality manufacturers parts also
So my question is this: which aftermarket parts manufactures provide very good quality parts, ie Lemförder, Meyle Spark, Moog, Metzger,Tedgum, just to name a few.
your recommendations, thoughts and experiences will be greatly appreciated.
Many thanks
RIch
Re: Which Aftermarket Manufacturers Offer Quality & V.F.M.
Posted: Tue Sep 22, 2020 4:01 pm
by X5Sport
I use Mann filters (oil, fuel, climate), plus Pagid for brake parts. I believe both are OEM just without the roundel badge and consequent price hike. Beru for the glowplug controller - again OEM without the gouge.
Wiper blade replacements have been Valeo
Re: Which Aftermarket Manufacturers Offer Quality & V.F.M.
Posted: Tue Sep 22, 2020 4:12 pm
by shy7g
X5Sport wrote: Tue Sep 22, 2020 4:01 pm
I use Mann filters (oil, fuel, climate), plus Pagid for brake parts. I believe both are OEM just without the roundel badge and consequent price hike. Beru for the glowplug controller - again OEM without the gouge.
Wiper blade replacements have been Valeo
Any recommendations when it comes to Suspension parts and bushes, (cause looking around for all the rear end parts)?
Re: Which Aftermarket Manufacturers Offer Quality & V.F.M.
Posted: Wed Sep 23, 2020 7:17 am
by Greydog
I used a mix Lemforder and Meyle HD Bushes Plus Polbushes (rear sub frame mounts) when I rebuilt the suspension at 75k as the OEM bushes were starting to go all over the car. Now on 153k and still sound so I would say no worse than OEM and less than a 1/3rd of the OEM cost when I brought them. I have 4 wheel alignment checked at Service MOT time with no adjustment required last 3 years.
I made my own bush removal tools using scrounged material from a local fabrication company, I even changed the Diff mounting bush which would be easier with the sub frame out. One of those jobs where tea was not strong enough.
Re: Which Aftermarket Manufacturers Offer Quality & V.F.M.
Posted: Wed Sep 23, 2020 12:38 pm
by Raj
shy7g wrote: Tue Sep 22, 2020 4:12 pm
Any recommendations when it comes to Suspension parts and bushes, (cause looking around for all the rear end parts)?
Meyle HD for bushes/arms etc I've tended to use.
Re: Which Aftermarket Manufacturers Offer Quality & V.F.M.
Posted: Wed Sep 23, 2020 7:45 pm
by henrym3
As mine is a keeper I poly bushed the whole suspension. Some purple but a lot supplied black. Worked on the principle that in a few years I’ll be to old and knackered to do that stuff again myself. Took the sub frame off and blasted, powder coated, new bushes. Rides great. Expensive though.
I also use febi/bilstein stuff which I’ve been happy with.
Re: Which Aftermarket Manufacturers Offer Quality & V.F.M.
Posted: Wed Sep 23, 2020 11:43 pm
by StuBeeDoo
I haven't yet had to have any bushes replaced on the F25, but on the E46 I had poly bushes on the front plus the diff mounts to the rear subframe, and Meyle HD for the rear subframe-body and all the rear arms.
Re: Which Aftermarket Manufacturers Offer Quality & V.F.M.
Posted: Sat Sep 26, 2020 3:19 pm
by shy7g
Hi All
has anyone purchased goods from
www.bmwautoparts.net
Company Details:
JSC "Krasta Auto Vilnius"
Company code: 302693894
Ozo g. 10A, 08200, Vilnius
Lithuania
there pricing are very good but not sure though if customs will allow goods straight through cause of the dreaded VAT (

)