XSeries-forum

Hi all,
i would love to have the exhausts coming out of the back like the petrol cars, i cant add slip ons as the pipes are the wrong side of the silencers. Has anybody found a simple way round this without the vast expense of a new system as there must be a market for it ?
Thanks
Paul

i bought the 4.8 tips and welded them on the rear boxes
looks great

I bet it looks how they should, nice one.
I want to try and do it so they work, two on Fleabay do it for £299.00 ish but there has to be an easier and cheaper way.

yeh just being and purchased two exhaust tips 4.8is size, there actually 2x porshe boxter upgrade ones what i bought, did a deal at exaust place the pair £60 then for my secret weapon.....my brothers a welder and has a little project to do one afternoon, there cut to fit just need welding, pics to follow soon

Pictures would be great cheers ( why are pictures a pain on this forum, others you simply upload ?).
I have some pictures a kind guy on here sent me showing the back boxes cut out then straight through and out the back, looks ace.

Try and make sure that the tips extend the same distance from the underbumper as they do on the 4.6, or it looks a bit strange. There is a diesel which has been done near me and they stick out too far which really spoils the effect.

My old car wish I'd taken em with me

I remember having this discussion a while back
viewtopic.php?f=8&t=1049&p=11625&hilit=exhaust#p11625

[quote=""x555""]I remember having this discussion a while back
viewtopic.php?f=8&t=1049&p=11625&hilit=exhaust#p11625[/quote]

Good memory that man, yup i dont give up easily.

just finished doing my exhaust conversion on my 3.0d bout an hour ago, i spent £60 on stainless exhaust tips and 6 hour with a grinder and welder......

Looks mint shadrak, where did you get those tailpipes m8?

Lovely result,bet your dead chuffed.

They look like a professional job & sit really well.

Enjoy your new look.

Lee

well chuffed with them, i got the stainless ends from local place that makes custom exhausts £60 the pair, had to cut them about all over to fit and it took some measureing to get right, i spent 3 hours last night and a few hours this morning doing it, who else was welding away at 9pm last night! the tips are also only 5mm one way and 3mm the other from oem size 4.8is ones so look mint. imo!

Top job there fella looks the biz

Do I take it these are just for show but mounted on the oe boxes? They look really great. Nice one mate


Sent from my iPod device using Tapatalk