Page 1 of 1
While theirs a few 1.4.0 scanners on topic
Posted: Fri Mar 30, 2012 6:11 pm
by scooby1doo1
I though I would ask a if anybody could have a quick lock at there PCD settings, I changed mine to increase the distance it made a constant beep. Although this works fine, I change I right and left sensors also, so these beep well before any contact. IE parking in a parking space just beeps. So could some body right down their settings or do a screen shot please.
Cheers
Sent from the Iphone via talktapa
While theirs a few 1.4.0 scanners on topic
Posted: Fri Mar 30, 2012 6:14 pm
by X5Driver
Note home for weekend but if no one else has come along I'll have a look
Re: While theirs a few 1.4.0 scanners on topic
Posted: Fri Mar 30, 2012 8:18 pm
by gadgetJunky72
time to pay it forward...
pvr was able to sort out my problem so it's only right i get you a screen shot. it'll have to be tomorrow though and i have been doing a bit of fiddling so not 100% sure if they are going to be "default" values.
While theirs a few 1.4.0 scanners on topic
Posted: Sat Mar 31, 2012 12:45 am
by scooby1doo1
It's ok I'll try oat
Cheers
Sent from the Iphone via talktapa
While theirs a few 1.4.0 scanners on topic
Posted: Sat Mar 31, 2012 12:46 am
by scooby1doo1
Toms fine just fitted new laptop screen 5mins ago after it was dropped, so now I have it working again, I have my 1.4.0 scanner back online.
Cheers to all
Sent from the Iphone via talktapa
Re: While theirs a few 1.4.0 scanners on topic
Posted: Sat Mar 31, 2012 2:54 pm
by gadgetJunky72
here are my PDC settings:
While theirs a few 1.4.0 scanners on topic
Posted: Sat Mar 31, 2012 4:18 pm
by scooby1doo1
Cheers for them
I will see what I've changed mine to.
Sent from the Iphone via talktapa