Page 1 of 2

exhaust on!!!!!!!!!!!

Posted: Tue May 08, 2012 8:42 pm
by troy.wyse
here we go. both side by side
Image
welding
Image
fitted
Image

sounds same as before so all for looks which is what i wanted and £130 all in!!!!!

Re: exhaust on!!!!!!!!!!!

Posted: Tue May 08, 2012 8:43 pm
by X5Sport
Looks like a nice job.. :thumbsup:

exhaust on!!!!!!!!!!!

Posted: Tue May 08, 2012 8:54 pm
by dirtymonkey29
Welded by darth vader and his light sabre?

Re: exhaust on!!!!!!!!!!!

Posted: Tue May 08, 2012 9:17 pm
by Raj
Glad they're all on ok. The boxes are kind of similar sizes hence no real increase in sound.

Look really good and cheap too...lol

Re: exhaust on!!!!!!!!!!!

Posted: Tue May 08, 2012 9:19 pm
by Sanj
Troy....

Not wishing to put a dampner on things but are they straight bud?

Both sides look like they're drooping downwards on the outer edge??? They should be dead straight/horizontal.

Hope it's just the pics buddy! :thumbsup:

Re: exhaust on!!!!!!!!!!!

Posted: Tue May 08, 2012 9:23 pm
by Raj
[quote=""Sanj""]Troy....

Not wishing to put a dampner on things but are they straight bud?

Both sides look like they're drooping downwards on the outer edge??? They should be dead straight/horizontal.

Hope it's just the pics buddy! :thumbsup:[/quote]

It's the pics paaji.

Even when they were on mine in pics they always looked bent. It's the way the tips sit tbh.

Re: exhaust on!!!!!!!!!!!

Posted: Tue May 08, 2012 9:28 pm
by Sanj
[quote=""Raj""]Even when they were on mine in pics they always looked bent. It's the way the tips sit tbh.[/quote]

You gonna start about being bent!?!

Re: exhaust on!!!!!!!!!!!

Posted: Tue May 08, 2012 10:04 pm
by troy.wyse
No they do sit a lil off but. Oth the same and we used the original mounts so not much else we could do. I'm happy with it

Re: exhaust on!!!!!!!!!!!

Posted: Tue May 08, 2012 10:11 pm
by Cannondale
I had my exhausts down recently when I put a towbar on. all I did was bolt them back up and they seem level. Not surehow they could be down at one side


Image

Image

Image

Re: exhaust on!!!!!!!!!!!

Posted: Tue May 08, 2012 10:48 pm
by troy.wyse
Dunno if 3.0d mounts differently only takes a few mm. Might play around at some point

Re: exhaust on!!!!!!!!!!!

Posted: Tue May 08, 2012 11:00 pm
by Raj
[quote=""Sanj""][quote=""Raj""]Even when they were on mine in pics they always looked bent. It's the way the tips sit tbh.[/quote]

You gonna start about being bent!?![/quote]

Funny how you pick up on those comments. Would you like to share something? :P :poke:

Re: exhaust on!!!!!!!!!!!

Posted: Wed May 09, 2012 10:01 am
by jeegnesh
[quote=""troy.wyse""]Dunno if 3.0d mounts differently only takes a few mm. Might play around at some point[/quote]
Did you just weld the tips or the whole piece? If the whole piece I assume the black smoke comes straight out the back if you put your foot down?

Re: exhaust on!!!!!!!!!!!

Posted: Wed May 09, 2012 10:05 am
by troy.wyse
Whole thing mate they are functioning tailpipes I hate all this fake dummy stuff. I guess if I boot it yes it will

exhaust on!!!!!!!!!!!

Posted: Wed May 09, 2012 10:55 am
by jeegnesh
U mean like these :-)

Image

Re: exhaust on!!!!!!!!!!!

Posted: Wed May 09, 2012 11:20 am
by n1k85
Looks good mate, nice cheap mod too!

Although as above, those tailpipes don't look quite right, on jeeganesh's photo above they sit straight as an arrow but on yours they seem to droop a little to the sides. That would bug me.

Maybe take some more pics from another angle?