XSeries-forum

so does anyone have a lost of the various options which can be set within my key for when i lock/unlock the vehicle?

The Key Memory List is in the posting below. YOU HAVE TO GET THE DEALER TO ACTIVATE THESE OPTIONS

Daytime Running Lights
When active: low intensity high beams automatically turn on when the ignition is on, enhancing visibility to other vehicles.
Not active
Active
Pathway Lighting
When active: by quickly flashing the highbeams after the ignition is turned off, the headlights remain on for about 40 seconds.
Not active
Active
Driver's Seat Position Memory
When active: the car automatically duplicates the same driver's seat position settings as the last time that particular key was used (included with each remote control key, activated by locking or unlocking the door).
Not active
Active (when unlocking the car)
Active (when opening the driver's door)
Armed Alarm Confirmation Signal
Alarm acknowledgement can be both visual and audible (signal lights flash and siren "chirps"), or only visual (signal lights flash).
Arm/Disarm confirmed both visually and audibly
Arm/Disarm confirmed visually only

the radio settings and climate control settings are also key memory controlled.