Hi guys, gave the car a scan, and it's come up with following
I have cleared the code and its disappeared but wondered what it meant!
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Bmw error
-
Olliefrom83
- Member
- Posts: 133
- Joined: Sat Jan 17, 2015 10:51 am
- Location: West sussex
Re: Bmw error
Help if I put the code down
5118 [20760] infocounter1-EGS reset
5118 [20760] infocounter1-EGS reset
Re: Bmw error
Summat to do with the Gearbox/Transmission. Any odd behaviour on the car? Done any work on it including an adaption reset?
Nothing useful on Google.
Richard
Nothing useful on Google.
Richard
Never anthropomorphise computers. They hate that.-
Olliefrom83
- Member
- Posts: 133
- Joined: Sat Jan 17, 2015 10:51 am
- Location: West sussex
Re: Bmw error
Hi Richard
Nothing I would say was odd with the car, not done any kind of reset with the adaptions using the software, I don't the foot on accelerator one ages ago, but I know that's only a temp reset. Searched Google and nothing has come up, I cleared the code and it went away, will drive the car about for a week and then check again and see if anything comes back up
Ollie
Nothing I would say was odd with the car, not done any kind of reset with the adaptions using the software, I don't the foot on accelerator one ages ago, but I know that's only a temp reset. Searched Google and nothing has come up, I cleared the code and it went away, will drive the car about for a week and then check again and see if anything comes back up
Ollie
-
Steamyrotter
- Snr Member
- Posts: 1304
- Joined: Sat Jul 31, 2010 11:06 pm
Re: Bmw error
May help to know what you are driving?
Different boxes may have different errors . also what code reader you used.
Different boxes may have different errors . also what code reader you used.
If things were meant to be easy, then I will soon complicate them....
Please note...
Anything I say is only from my personal experience and knowledge..
I don't assume to know everything, and know there is a lot I don't know..
But then I could be talking bollox.. O:-)
Please note...
Anything I say is only from my personal experience and knowledge..
I don't assume to know everything, and know there is a lot I don't know..
But then I could be talking bollox.. O:-)
-
Olliefrom83
- Member
- Posts: 133
- Joined: Sat Jan 17, 2015 10:51 am
- Location: West sussex
Re: Bmw error
Hi
It's a 2005 3.0d auto 6 speed
I was using bmw 1.4.0 software plugged in port under steering wheel
Thanks
Ollie
It's a 2005 3.0d auto 6 speed
I was using bmw 1.4.0 software plugged in port under steering wheel
Thanks
Ollie