Is there an Camber adjustment on the front wheels.?
Im aware that the rear axles can be tweeked - so long as the parts arent rusted solid..
But are there after market parts or adjustments that can alter the front camber so that the wheels are wider apart at the bottoms, so as to negate yhe tyre scrubbing on the out side tyre edges ?
When I owned Discoverys, we could get bushes with the bush centres off-set to allow for a modified set up...
What can we do with our X5s ??
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Front axle camber adjustment ?? 2004 DSport.
-
- Snr Member
- Posts: 1371
- Joined: Sun May 25, 2014 11:13 pm
Re: Front axle camber adjustment ?? 2004 DSport.
2011 Kia Sorento KX3 2.2D 60 Plate Auto in black ( mine )
BMW E83 X3. 3.0d M Sport, 2008 in black ( now gone )
BMW E93 330i Convertible Msport 2007. ( Now sold )
VW Golf 2.0 TDI 140 GT 2010 ( now sold )
Now Sold 55 plate, X5, 3.0 D Sport. Silv
BMW E83 X3. 3.0d M Sport, 2008 in black ( now gone )
BMW E93 330i Convertible Msport 2007. ( Now sold )
VW Golf 2.0 TDI 140 GT 2010 ( now sold )
Now Sold 55 plate, X5, 3.0 D Sport. Silv
-
- Snr Member
- Posts: 1371
- Joined: Sun May 25, 2014 11:13 pm
Re: Front axle camber adjustment ?? 2004 DSport.
Perfect... just ordered a set.
Thankyou.
I have a mungus great set of tyres/wheels on my X5, matching set all round & rear spacers...
So lifted the rear end 2" by adjusting the air suspn sensors,
Wanting to lift the front to match now, got 2 off 50mm shims for the front suspension tops,
And needed to to adjust the camber to offset the suspn arm pull in.
Additionally, the X5s scrub the front tyre outer edges, so, Im keen to stop this scrubbing & level the tread to the ground in the process.
The extra tyre width on the ground & extended wheel track makes the 2" additional ride height possible without upsetting the Gravity centre point as original.
Looking good now
Thankyou.
I have a mungus great set of tyres/wheels on my X5, matching set all round & rear spacers...
So lifted the rear end 2" by adjusting the air suspn sensors,
Wanting to lift the front to match now, got 2 off 50mm shims for the front suspension tops,
And needed to to adjust the camber to offset the suspn arm pull in.
Additionally, the X5s scrub the front tyre outer edges, so, Im keen to stop this scrubbing & level the tread to the ground in the process.
The extra tyre width on the ground & extended wheel track makes the 2" additional ride height possible without upsetting the Gravity centre point as original.
Looking good now
-
- Snr Member
- Posts: 1371
- Joined: Sun May 25, 2014 11:13 pm
Re: Front axle camber adjustment ?? 2004 DSport.
Update...
The camber adjustment cam'd bolts arrived.... seriously substantial & up to the job.
I also bought some magnet mount Camber level measurement clamps...
These are essentially a super-accurate Looooong spirit level with a magnetic base mount to clamp to the brake disk & an adjuster to centre the device to get a "0" measurement before you start tinkering.
So, firstly, it should benpossible to alter the camber to get rid of the X5 front tyre outer edge scrubbing issue...
And
Reset the camber after the front end is raises 2 inches to bring the geometry correct...
Pics to follow soon.
The camber adjustment cam'd bolts arrived.... seriously substantial & up to the job.
I also bought some magnet mount Camber level measurement clamps...
These are essentially a super-accurate Looooong spirit level with a magnetic base mount to clamp to the brake disk & an adjuster to centre the device to get a "0" measurement before you start tinkering.
So, firstly, it should benpossible to alter the camber to get rid of the X5 front tyre outer edge scrubbing issue...
And
Reset the camber after the front end is raises 2 inches to bring the geometry correct...
Pics to follow soon.