Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

INPA using

Discuss your latest mods or ideas, and anything to do with the BMW X5 (E53).
Post Reply
User avatar
marinaman
Member
Member
Posts: 263
Joined: Mon Mar 13, 2017 12:04 am
Contact:

INPA using

Post by marinaman » Thu Jun 15, 2017 8:39 pm

Hi
Is there a page anywhere on the basics of using this INPA , i know a lot will be learn as you go as i did with the VW software but this seems more complex, just trying to get webasto going,
Found the section,  turned on metering pump,  got fuel pumped out through little exhuast,  turned on heater expecting it to burst into life,  i had the fan going and the pump but thats all ,  it still pumped fuel through exhaust while fan going.
got fault  glow control short to ground i think,
i thought this was a faulty glow burner ?  i did take it out and put 12v to it an dit lit up bright red while i presumed it was working.
Thanks
B&B by the sea in sunny Bridlington, best rates for members  :) www.themarina-bridlington.com

Online
User avatar
X5Sport
Global Moderator
Global Moderator
Posts: 19006
Joined: Fri Sep 03, 2010 4:09 pm
Location: Planet X6......

Re: INPA using

Post by X5Sport » Thu Jun 15, 2017 9:27 pm

You might find some useful stuff on bmwcoders dot com as it's all about....well...coding, and has a fair bit on there covering the different tools and software  :)
:ant: Never anthropomorphise computers. They hate that.

User avatar
marinaman
Member
Member
Posts: 263
Joined: Mon Mar 13, 2017 12:04 am
Contact:

Re: INPA using

Post by marinaman » Thu Jun 15, 2017 9:40 pm

ok  thanks maybe some real generous time free person could do a write up for newbies on this system.
B&B by the sea in sunny Bridlington, best rates for members  :) www.themarina-bridlington.com

Post Reply