Having the transmission fail safe warning coming up sometimes when I start the car, sometimes it goes off if I switch ignition off wait for wng light to go out and try again, sometimes it doesn't.
have tried switching key to pos 1 and waiting a few seconds and then switching to start pos on key, somitimes it works sometimes not.
I have just bought a Creator BM multi-system C310 scan tool which covers most of the BMW models.
The code it brings up for this fault is : 3C Transmission switch.
Any ideas where the switch is located and what it is/does.
Lez
.
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Transmission failsafe
-
Onlinelezmtaylor
- Member
- Posts: 994
- Joined: Sat Jul 31, 2010 11:25 pm
- Location: Gloucester
Transmission failsafe
2002. 4.4lpg,ledAE's,Xenons,paddleshift,compass mirror,inst rings,led int lights,rear camera,crystal tailights,eisenmann road exh,Schnitzer pedals,chrome indicators,colour co-ord headlamps & bonnet grilles,hualigim entertainment system.dash and rearcamera,comfort seats.hud,bull bars,engine instalube
Re: Transmission failsafe
Does it make any difference if you put the car in neutral and try starting it.
Re: Transmission failsafe
Could this be the inhibitor switch, if so then it's on the right hand side of the box on the end of the shifting mech.
Of course, I could be totally wrong
Of course, I could be totally wrong
-
OnlineX5Sport
- Global Moderator
- Posts: 19006
- Joined: Fri Sep 03, 2010 4:09 pm
- Location: Planet X6......
Re: Transmission failsafe
Found this reference.....'That is a fault with the pressure control solenoid C'.
Never anthropomorphise computers. They hate that.-
Onlinelezmtaylor
- Member
- Posts: 994
- Joined: Sat Jul 31, 2010 11:25 pm
- Location: Gloucester
Re: Transmission failsafe
[quote="X5Sport"]
Found this reference.....'That is a fault with the pressure control solenoid C'.
[/quote]
and where would I find this solenoid ?
Lez
Found this reference.....'That is a fault with the pressure control solenoid C'.
[/quote]
and where would I find this solenoid ?
Lez
2002. 4.4lpg,ledAE's,Xenons,paddleshift,compass mirror,inst rings,led int lights,rear camera,crystal tailights,eisenmann road exh,Schnitzer pedals,chrome indicators,colour co-ord headlamps & bonnet grilles,hualigim entertainment system.dash and rearcamera,comfort seats.hud,bull bars,engine instalube
-
OnlineX5Sport
- Global Moderator
- Posts: 19006
- Joined: Fri Sep 03, 2010 4:09 pm
- Location: Planet X6......
Re: Transmission failsafe
Inside the box I suspect. 
Never anthropomorphise computers. They hate that.-
Onlinelezmtaylor
- Member
- Posts: 994
- Joined: Sat Jul 31, 2010 11:25 pm
- Location: Gloucester
Re: Transmission failsafe
[quote="X5Sport"]
Inside the box I suspect.
[/quote]
Oh well, can't see me diving inside the box !! not at 74 anyway.
Have tried starting in neutral seems to prevent the trans wng, could it be that the selector switch is in need of adjustmment ?
Lez
Inside the box I suspect.
[/quote]
Oh well, can't see me diving inside the box !! not at 74 anyway.
Have tried starting in neutral seems to prevent the trans wng, could it be that the selector switch is in need of adjustmment ?
Lez
2002. 4.4lpg,ledAE's,Xenons,paddleshift,compass mirror,inst rings,led int lights,rear camera,crystal tailights,eisenmann road exh,Schnitzer pedals,chrome indicators,colour co-ord headlamps & bonnet grilles,hualigim entertainment system.dash and rearcamera,comfort seats.hud,bull bars,engine instalube
Re: Transmission failsafe
[quote="lezmtaylor"]
[quote="X5Sport"]
Inside the box I suspect.
[/quote]
Oh well, can't see me diving inside the box !! not at 74 anyway.
Have tried starting in neutral seems to prevent the trans wng, could it be that the selector switch is in need of adjustmment ?
Lez
[/quote]
Have a look at this see if it helps.
http://www.rangerovers.net/forum/6-rang ... p-pls.html
[quote="X5Sport"]
Inside the box I suspect.
[/quote]
Oh well, can't see me diving inside the box !! not at 74 anyway.
Have tried starting in neutral seems to prevent the trans wng, could it be that the selector switch is in need of adjustmment ?
Lez
[/quote]
Have a look at this see if it helps.
http://www.rangerovers.net/forum/6-rang ... p-pls.html