Gutted !!!

[Colin]

My mechanic sent me this today ...... new fan installed  now a rebuild

[henrym3]

[quote="Colin"]
My mechanic sent me this today ...... new fan installed  now a rebuild
[/quote]
Hope it all goes back together and the fault is gone. Must be nearly finished all the improvements now Colin


Sent from my iPhone using Tapatalk

[Colin]

I just hope there is no squeaks or rattles when its rebuilt

[Colin]

Got the X back today  and all is good no squeaks or rattles  and a silent running fan

[X5Sport]

It doesn’t work then......

Glad it’s all (finally) sorted. 

[graemeX5]

That's good your mechanic go it all done and no rattles and no squeaky fan.

I guess it's like a nearly new car now with all the improvements
Graeme

[henrym3]

It's only gone quiet so you can hear the next fault, seriously though, hope you have long and trouble free motoring.

[Colin]

henrym3  Next thing is headlights  they a bit cloudy
Anybody got a good tip

graemeX5  The X drives like new alright  and doesn't look to shabby, i just get on a roll with the jobs n mods

[ttr]

Colin,

i used Farecla g3 swirl remover on mine, worked a treat in my opinion, other cutting compounds may give you the same results.

i tried a small section first just to make sure i was not going to FUBAR anything.

I was happy then to use.

HTH

[Colin]

Thanks ttr , did you use power tools or hand .

Colin..

[ttr]

Colin,

No worries, I elected to use hand as did not want to get my mop out, you can keep a better feel with delicate parts by hand in my opinion. With a mop I stand the risk of being to aggressive.

I used the same technique on the black anodised trim that surrounds the windows and doors, mine were very tarnished and came up like new and has weathered well with an occasional polish only.

Hope this helps

[Colin]

Thank you for the info  will definitely give it a go

[Colin]

Nephew got me this

[Colin]

[Colin]

i done these yesterday , took almost 2 hours , a before and after