Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
4.4 vs 4.6 vs 4.8 exhaust tube dia
4.4 vs 4.6 vs 4.8 exhaust tube dia
Right.. I f you have a 4.6 or a 4.8 can you do me a favour and measure the exhaust pipe outside diameter (as accurately as poss) just behind the rear mufflers please and post your results. I have a plan.. I think.
Re: 4.4 vs 4.6 vs 4.8 exhaust tube dia
Does that include interest in after market exhausts as well, I have a Magnaflow fitted.
- lezmtaylor
- Member
- Posts: 994
- Joined: Sat Jul 31, 2010 11:25 pm
- Location: Gloucester
Re: 4.4 vs 4.6 vs 4.8 exhaust tube dia
Mine is an Eisenmann exhaust,cost me (wife actually, birthday pressie) £700 secondhand, each pipe (4) is 83mm OD.
Lez
2002 E53 4.4
Lez
2002 E53 4.4
Re: 4.4 vs 4.6 vs 4.8 exhaust tube dia
Working from memory now (could be dodgy)
The 4.6is has different size primary pipes (Cat back to resonator) Drivers side 50mm near side 55mm. Central resonator to rear silencers 55mm
The 4.8 from memory is 60mm all the way
hope this hasn't put a crimp in your cunning plan
The 4.6is has different size primary pipes (Cat back to resonator) Drivers side 50mm near side 55mm. Central resonator to rear silencers 55mm
The 4.8 from memory is 60mm all the way
hope this hasn't put a crimp in your cunning plan
Re: 4.4 vs 4.6 vs 4.8 exhaust tube dia
+1 on details, 50mm passengers side 55mm drivers side to cats, 55 mm out of cats to resonator. There was some dispute as to whether the resonator had x pipes, when mine were removed they definitely did NOT. The Magnaflow does have x pipes. Then 2 small resonators but no back boxes as you can see in the picture above. Sounds more V8 at idle.No drone, I didn’t notice any more interior noise. Only problem I’ve had was due to the fact that there were no joints. Had to cut near cats and fit a join because of removing the rear subframe.