Passed......

[Denis O]

In to Halfords Autocentre for MOT yesterday. My first since buying the car a year ago and it passed  with just a couple of advisories:

1). Offside rear tyre almost on wear limit, Knew that so looking for a 20" Diamaris to replace.

2). Handbrake at 18% efficiency when pass is 16%. I can't remember the last time I used the handbrake, being an auto it just goes into park. Probably lack of use that's made it give up. Will have a look at the shoes next time the wheels off.

So 1/2 price MOT (£27.42) as I booked it on-line. Arrived at 08.30 and left at 09.30. No pressure to have brakes or anything else done by them so all good.

[X5Sport]

Well done you...and the X5..

Handbrake is a common one on these cars because not everyone uses it as the auto uses 'P' anyway.

Richard

[graemeX5]

It's always nice to get your car thru an Mot without any problems

[Horizon]

When they mot'd mine he just drove it down the street to test the brakes, handbrakes crap, as pointed out, I never use it. I thought they couldn't test the x on the brake tester as its permanent 4 wheel drive???

[gmc15]

A common fix for the poor hand brake is to drive for a short distance with the hand brake partly on to burn off any glaze on the drum/linings. This is normally done just before the MOT and helps with the efficiency

[X5Sport]

Just don't do it with the new dangled electric handbrake!!

Richard

[jaynana]

[quote="gmc15"]
A common fix for the poor hand brake is to drive for a short distance with the hand brake partly on to burn off any glaze on the drum/linings. This is normally done just before the MOT and helps with the efficiency
[/quote]

i had a warning on the handbrake efficiency in one MOT. did above and passed the next without any warnings. lol

[Geezer]

[quote="gmc15"]
A common fix for the poor hand brake is to drive for a short distance with the hand brake partly on to burn off any glaze on the drum/linings. This is normally done just before the MOT and helps with the efficiency
[/quote]

....yes I do this al the time ...erm....to burn off the glaze on the linings ..... And not because I forgot at alll  O:-)

[Denis O]

Interesting comments about scrubbing the drum/lining. Guess what I shall be doing just before the next test.

The guy did use the Decelerometer to test the brakes and a quick look at the MOT rules suggests,

"During the decelerometer test, each application of the brake should be gradual and the tester should endeavour to achieve only the required percentage to pass, rather than the best possible result"

Not surprising that it only achieved 18% as the tester should not be looking for any more.

Full details of brake testing here http://www.motuk.co.uk/mcmanual_330.htm