HI All,
i have an issue with my BMW X5 E70 handbrake.
i had a fault come up on the screen stating the handbrake is faulty. When i lift the lever nothing happens and when i press the auto hold button i get a further alert stating there is a fault with the handbrake.
i can drive the car no problem and when driving if i pull the lever up the handbrake does come on (Obviously i have only tested this as very slow speed)
i am hoping this is just a switch fault and not the actuator.
Can anyone else help, or has anyone had the same problem.
Kind regards
Lumpimeister.
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Handbrake fault
Re: Handbrake fault
We have seen this a few times and it usually means the actuator unit isn’t working properly.
There was a thread on here a few months back from someone who managed to repair theirs - if if yours is still working that might be good to try.
Otherwise they are about £500 or more from BMW (who will only replace not repair).
Not the best start to 2018 >:(
But
anyway 
There was a thread on here a few months back from someone who managed to repair theirs - if if yours is still working that might be good to try.
Otherwise they are about £500 or more from BMW (who will only replace not repair).
Not the best start to 2018 >:(
But



Re: Handbrake fault
Mines gone again!!! Luckily I phone BMW as all their parts have a 2 year warranty and it's booked up for the end of the month.
Mine was stuck and I had to manually release the beast.
I had a new actuator done about 18 months ago, not sure why it gone so quickly
Sent from my SM-G900F using Tapatalk
Mine was stuck and I had to manually release the beast.
I had a new actuator done about 18 months ago, not sure why it gone so quickly
Sent from my SM-G900F using Tapatalk
X5 E70 3.0D SE